Candy

Components

Drivetrain

BSA xx mm Width, currently square-taper Shimano ... 3 x 7 gears, 7-speed Shimano Altus rear derailleur 3-speed Shimano ??? front mech Shimano Altus (?) 3×7 Shift+Brake Levers (these are shit, replace them if possible)

Microshift Advent 1×9

11-42 teeth cassette, could be upgraded to 11-46

FSA cranks, with 40 teeth chainring, 120mm symmetric 4-arm spider

68.4 BSA 4-Kant

Seat Post: 26.2 mm (!) diameter

Ansmann RM 9.0 Elektro-Antrieb

Possible Upgrades

Foldable Cargo Box Project

ordentlich abschneiden

Gewicht sparen: Box neu

Kiddy seat belts

Upgrades Done

2023-03-24

Replaced obsolete front hub dynamo with front wheel without.

1.0kg -> 0.7kg

Replaced rear cantilever brakes with hydraulic Magura brakes

cable is really long, should be shortend

have everything for front brake, but mounted 1.8m cable is too short. Get at least 2.5m

check if Magura mineral oil can be replaced with Shimano

Reddit: https://www.reddit.com/r/bikewrench/comments/czprxl/has_anyone_used_shimano_mineral_oil_in_magura/

2023-03-01

Sattelstütze mit 2cm Setback, 26.2mm diamter

works, but clamping system is shit. Try loctite?